Joined in 2023 
82 
63 About this deal
The Ixtech Low Profile Mic Arm's material feels more premium than its price would suggest. The ixtech low profile mic arm comes in great condition, allows for very good quality, It is very happy and has a special design. It comes with a strong c-clamp for firm attachment to your desk and has a practical folding design for fuss-free storage and transportation. In addition, it allows for great things. It looks good and has a cable management design. Our m!ka How To Clips offer you advice and give you an overview of available mounting options and give you advice on how to install and mount m!ka. One video also shows you how to balance the m!ka Mic Arm with the weight of your microphone.
The Blue Microphones Compass is a premium, low-profile option that comes with a surprising collection of small, yet appreciated features handy for streaming, podcasts, and content creation. While on the smaller size, this mic boom arm is a solid addition to most studios, and comes with a few unique features not seen on other models.The On-Stage MBS5000 is built from quality aluminum, reinforced by dual suspension springs that make it far more convenient for moving and adjusting the boom arm on the fly. More importantly, due to its strength, it can handle a variety of microphones weighing 3.5 pounds, in addition to alternative devices like tablets, lights, and cameras. By swapping only the joint instead of the whole m!ka On Air Mic Arm, you have the option to easily upgrade your existing m!ka On Air Arm with CleanVision® lighting characteristics in dual color. How easy it is to swap head joints is shown in this short video tutorial. Now fasten the T-screws just enough to perfectly hold the mic in any position wherever you pull it. Do not pull the knurled screws too tight. They may break and the joints may squeak. Instead readjust the screw inside the bottom as in Step 1 in case you are not happy with the result of your adjustment. For the Shure SM7B and MV7, we recommend using the Rode PSA1. It can support between 700 and 1.1kg of weight, which is right in the range of both the Shure SM7Band Shure MV7 microphones.
You’re paying almost double the price for various upgrades, and these features may or may not be dealbreakers to you. The arm body has two spring-loaded sections that are both squeak-free and flexible — making it a perfect choice for broadcast radio studios or voice-over studios. The RODE PSA1 contains few bells and whistles, but it gets the job done with a maximum microphone weight load of 2.4 lbs (1.1kg). With the way music marketing is going, content creation is becoming an asset to bands and producers alike. Many have turned to YouTube and Twitch to host live production/DJ streams and band vlogs.Setting it is as easy as attaching the desk clamp where you’d like and then placing the arm in the holder. Depending on your placement, the added riser makes it easy for the Wave Mic Arm to reach right over top of your monitor if that’s how you like it. One thing to note is that if you want the arm to come from under, you’re better off going with the LP version. Just a warning. Elgato Wave Mic Arm Specs If your m!ka Arms ever squeak or if you can't put your mic in position smoothly, there is an easy solution for that: Once the arm is properly installed and tensioned (some mics are heavier than others of course) it’s a dream to use. I found that my microphone (I tested this with the Elgato Wave:1 and the HyperX Quadcast S) stayed exactly where I put them, and I think that a mic arm that comes from underneath your monitors looks a lot cleaner than an arm that towers over your desk like an excavator arm, though that’s of course just my subjective opinion. The two most important aspects to look for in a boom arm are 1) compatibility and 2) maximum capacity. Sometimes called a ‘scissor arm stand’, desk-mountable suspension boom arms have notably risen in popularity, thanks to the rise of streaming and podcasting.
The Neewer NW-35, for starters, is incredibly durable thanks to the use of steel. It has a great reach of 27.6 inches with a maximum capacity of 3.3 pounds. More importantly, you can make very fine adjustments to the boom arm due to its 360-degree fully rotatable and 270-degree pivotable spigot. The Samson Low Profile Mic Arm's superior materials make sure that it ages well with use. The samson low profile mic arm provides a maximum horizontal/vertical arm reach of 18", giving users convenient flexibility with their mic placement. Upgrade your home studio setup with the samson mba18 adjustable microphone desktop stand. The mic book arm easily attaches to a table or desk via its c - clamp mount, which offers a maximum grip of 2.
Make sure that all three T-screws are not too tight but in a somewhat loose position. Then identify the screw on the bottom of the m!ka Mic Arm and adjust your arm with your mic attached to have it levitate in your favored position.
The Griffin Low Profile Mic Arm's high-end materials make sure that it ages well with use. The griffin low profile mic arm is fully operated by musicians and djs. The Manufacturer says: Additionally, our paints are inspected at the factories to be environmentally safe by passing or exceeding TCCA title vi (epa) compliant standards. This short micmount stand works well for people of all stature.s. After carefully inspecting almost 100's of arms, we think the best arm, that suit most people, is metioned as first option below. To let your webcam capture an unobstructed view of the scenes, we designed the m!k Mic Arm TV. Wherever you need free vision, the low profile microphone arm offers just that. It hovers just above desktop level. Easily mount it to a m!ka Pole and place it wherever you want. To install m!ka On Air Arms, we suggest to use XLR-5 pin connectors for microphone signal and on air light feed on the lower end of the cable and XLR-3 type connectors for microphone on the cable's upper end. If you've watched a stream or two, maybe a few dozen YouTube videos, you might have noticed a long, seemingly metal arm attached to the content creator's microphone. That's a boom arm! It's a great way of lifting the microphone off the desk and into a position that's best suited for you. Best of all, they can be adjusted on the fly.Lastly, there is a hidden cable channel to help with the look to make sure you have less wires showing around the mic. As sturdy as they come
Great Deal 
New Comment